sam-ba 3.1.3 Error: Could not switch monitor on port 'xxx' t

All design tool related questions: compiler, assembler, linker. Embedded programming questions: assembler, C code.

Moderator: nferre

lachlanp
Posts: 27
Joined: Sun Jan 28, 2007 9:41 am

sam-ba 3.1.3 Error: Could not switch monitor on port 'xxx' t

Tue Aug 23, 2016 4:35 pm

I have tried using sam-ba 3.1.3 with Debian 8.5 and windows 10. For both operating systems I get the error as indicated above about switching to binary mode.

Does anyone know what this is occuring and is there a solution.

I have tried this on VirtualBox v5.1.2 running Debian 8.5 guest on a Windows 10 host, a Linux Machine also running Debian 8.5, and a windows 10 machine. all three have the same error.

Regards
Lachlan
aarcov
Posts: 12
Joined: Thu Aug 18, 2016 3:26 pm

Re: sam-ba 3.1.3 Error: Could not switch monitor on port 'xx

Tue Aug 23, 2016 11:36 pm

Have you tried opening a normal serial port with the device connected?
lachlanp
Posts: 27
Joined: Sun Jan 28, 2007 9:41 am

Re: sam-ba 3.1.3 Error: Could not switch monitor on port 'xx

Wed Aug 24, 2016 7:26 pm

Thanks for your reply.

I finally determined that I need to hold a button down on the board on reset to bring the processor up with the port in Binary mode.
Problem solved.
Thanks for your help.
elyask
Posts: 2
Joined: Mon Jul 01, 2019 6:41 am

Re: sam-ba 3.1.3 Error: Could not switch monitor on port 'xx

Mon Jul 01, 2019 6:50 am

lachlanp wrote:
Wed Aug 24, 2016 7:26 pm
Thanks for your reply.

I finally determined that I need to hold a button down on the board on reset to bring the processor up with the port in Binary mode.
Problem solved.
Thanks for your help.
Hi,

I am having the same problem. Can you elaborate further how you solved your problem?

Thanks
Elyas

Return to “Development Tools”

Who is online

Users browsing this forum: No registered users and 2 guests