AT91SAM7X512

Your remarks will be take into account in order to increase efficiency of this Forum: Helping the AT91 Community.

Moderator: nferre

tgarcia
Posts: 2
Joined: Thu Aug 07, 2014 8:43 pm

AT91SAM7X512

Thu Aug 07, 2014 8:56 pm

I have been trying for a week now to determine if MRL (Marketing revision level) B for the AT91SAM7X512 processor was an actual change or a de-rating of the internal flash memory access time. The EOL notice is vague and doesn't really declare that the part has been changed, although a box called "FIRMWARE" is checked on the notice. If that is true then the part has changed and there is much re-testing to be done. Obviously, I would like to avoid that if possible.

So, if anyone knows anything about Rev B of the AT91SAM7X512, please reply. Reading the errata for MRL A, it seems that this too was a change to the flash memory access time - not sure if this a de-rating or a change also??
gerhardf
Posts: 552
Joined: Thu Dec 02, 2004 2:28 pm

Re: AT91SAM7X512

Thu Aug 07, 2014 10:48 pm

hello
afaik rev b was a result of changing the fab. in the past the sam devices were produced by lfoundry (a former atmel fab). due to the bankrupt of lfoundry (see here: http://www.electronics-eetimes.com/en/l ... =222919503) there was a need to change the fab and obviously the new fab isn't able to produce fast flash.

regards
gerhard
tgarcia
Posts: 2
Joined: Thu Aug 07, 2014 8:43 pm

Re: AT91SAM7X512

Fri Aug 08, 2014 12:08 am

Much appreciated. ATMEL is tough to get on the phone.

Return to “About the Site and the Forum”

Who is online

Users browsing this forum: No registered users and 1 guest