Serious Issues Using SAM-BA

Moderator: nferre

Posts: 17
Joined: Tue Jun 21, 2016 12:03 am

Serious Issues Using SAM-BA

Thu Oct 06, 2016 10:31 pm

I'm using linux on my host machine and trying to use SAM-BA with the SAMA5D2 XPLAINED (rev B). Initially, any command I tried to failed with

Code: Select all

"Opening serial port 'ttyACM0'
Error: Could not switch monitor on port 'ttyACM0' to binary mode
Connection closed.
I finally used a terminal program (C-Kermit) to manually connect to the port (had to set the baud rate to 57600 instead of 115200 as stated in the datasheet) and use the N# command. Then my commands at least got farther.

No any time I try to use an applet, I get the following

Code: Select all

sam-ba --port serial:ttyACM0:57600 --board sama5d2-xplained --applet bootconfig
Connection opened.
<path>/tools/sam-ba_3.1.4/qml/SAMBA/Applet.qml:96: Error: Could not initialize applet (status: undefined)
Connection closed.
It's the same for any applet. This has been ridiculously frustrating. Please, someone help me out with this.

Return to “SAM9-based”

Who is online

Users browsing this forum: Majestic-12 [Bot] and 2 guests