Serious Issues Using SAM-BA

AT91EB40A, EB55, EB42 Evaluation Boards , AT91RM9200-DK, RM3400-DK will be the focus of the discussions: hardware guidance, embedded software, use,...

Moderator: nferre

PeterT
Posts: 14
Joined: Tue Jun 21, 2016 12:03 am

Serious Issues Using SAM-BA

Thu Oct 06, 2016 10:31 pm

I'm using linux on my host machine and trying to use SAM-BA with the SAMA5D2 XPLAINED (rev B). Initially, any command I tried to failed with

Code: Select all

"Opening serial port 'ttyACM0'
Error: Could not switch monitor on port 'ttyACM0' to binary mode
Connection closed.
I finally used a terminal program (C-Kermit) to manually connect to the port (had to set the baud rate to 57600 instead of 115200 as stated in the datasheet) and use the N# command. Then my commands at least got farther.

No any time I try to use an applet, I get the following

Code: Select all

sam-ba --port serial:ttyACM0:57600 --board sama5d2-xplained --applet bootconfig
Connection opened.
<path>/tools/sam-ba_3.1.4/qml/SAMBA/Applet.qml:96: Error: Could not initialize applet (status: undefined)
Connection closed.
It's the same for any applet. This has been ridiculously frustrating. Please, someone help me out with this.

Return to “Evaluation and Development Boards”

Who is online

Users browsing this forum: No registered users and 1 guest