Page 1 of 1

ATSAMA5D27-SOM1-ek sam-ba qspi

Posted: Fri Sep 28, 2018 3:13 pm
by friesen
I am trying to read and write the on board qspi flash on the kit, but find it doesn't want to work.

per examples, I am trying this -
sam-ba -b sama5d27-som1 -p j-link -a qspiflash -c read:firmware.bin
Opening J-Link with S/N '483047728'
Found Atmel SAMA5D2 device
Disabling watchdog
Connection opened.
C:/sam-ba/sam-ba_3.2.3/qml/SAMBA/Applet.qml:232: Error: Could not initialize applet (status: 1)
Connection closed.
The serial console reports -
Applet 'QSPI Flash' from softpack 2.13 (v2.13-31-g65146d0e6256).
Initializing QSPI1 IOSet2 at 66000000Hz
-E- Error while detecting QSPI flash chip

Re: ATSAMA5D27-SOM1-ek sam-ba qspi

Posted: Fri Sep 28, 2018 6:57 pm
by friesen
I had to boot the board with the jumper on J13, then remove, now it works.

Re: ATSAMA5D27-SOM1-ek sam-ba qspi

Posted: Tue Feb 19, 2019 3:03 pm
by supersonic31337
Hello, I have same problem but your solution dosnt helped me :(