The SAMA5D27-SOM1-EK1 schematic shows it uses a triple output regulator. Since we are intending to power the VDDSDHC with 3.3v, not 1.8v on our custom SAMA5D27-SOM1 board, we can do away with the 1.8v regulator output. Is it necessary to have VDD_IN and VDDSDHC on separate 3.3v power rails? Are we safe to use a single 3.3v output regulator to power both VDD_IN and VDDSDHC and some other peripherals?
2 posts • Page 1 of 1
Found the answer.
Code: Select all
Power Supply Configuration #1 The SAMA5D27 SOM1 is supplied by only one main supply. In this configuration mode, all supplies are connected together and supplied by the main 3.3V supply. All PIOs have VDDIN_3V3 Power Rail as voltage reference.
Who is online
Users browsing this forum: No registered users and 2 guests