Problems with QSPI-XIP!

For SAMA5D2 Xplained, SAMA5D3 Xplained and SAMA5D4 Xplained

Moderator: nferre

xzp114
Posts: 23
Joined: Thu Mar 16, 2017 12:30 pm

Problems with QSPI-XIP!

Wed Apr 12, 2017 9:19 am

I am using ATSAMA5D2B-XULT with SAMA5D27 Rev B silicon.
I built the qspi_xip example for configuration SRAM using IAR 7.60.2
When launched from the debugger, the example runs properly.I flash the example for configuration QSPI0 to QSPI0.When I try to reboot and let RomBOOT run the program, it does not run, it just prints RomBOOT.
I have used sam-ba to set QSPI0_IOSET3 and QSPI_XIP_MODE.

BSCR=0x00000005 / BUREG1,VALID
BUREG1=0x00240ffe / QSPI0_IOSET3,QSPI1_DISABLED,SPI0_DISABLED,SPI1_DISABLED,NFC_DISABLED,SDMMC0_DISABLED,SDMMC1_DISABLED,UART1_IOSET1,JTAG_IOSET1,EXT_MEM_BOOT,QSPI_XIP_MODE

Return to “SAMA5 Xplained”

Who is online

Users browsing this forum: No registered users and 3 guests