Optional micro SDCard reader J11 impossible to buy

Moderator: nferre

BunnyHug
Posts: 9
Joined: Thu Sep 10, 2015 12:20 pm

Optional micro SDCard reader J11 impossible to buy

Tue Nov 10, 2015 11:01 am

Good morning to all,
I was thinking to add the J11 MicroSD Card connector on the SAMA5D3-Xplained board, from the Atmel documentation the part number is: JXT MCTF-0403
This connector is impossible to find on the market, I tried also using the Chinese search engine Baidu getting no result. I also noticed that its pinout is not compatible with other SD Card connectors easily available from the main distributors.

Anyone had the same problem? Thank you in advance
mikepro
Posts: 27
Joined: Thu Jan 23, 2014 9:31 pm

Re: Optional micro SDCard reader J11 impossible to buy

Tue Nov 10, 2015 12:06 pm

Hi

I don't have Xplained board myself, but I looked at the BOM listing in manufacturing files.
They also refer to the microSd connector as TF01A-M1 (footprint name)

If you are looking for single pieces, TF01A can be sourced from:
http://www.aliexpress.com/item/Tf-card- ... 49980.html

I can't be 100% sure this the exact same or compatible part, but there's a mechanical drawing of the connector you can compare to the actual PCB or gerbers. There's probably an equivalent connector available from some other manufacturer also.
BunnyHug
Posts: 9
Joined: Thu Sep 10, 2015 12:20 pm

Re: Optional micro SDCard reader J11 impossible to buy

Tue Nov 10, 2015 12:43 pm

MikePro,
You are completely right! Looking for the footprint name I can get much more results and the one on aliexpress seems to fit on the atmel board.
Thank you so much.

Return to “SAMA5-based”

Who is online

Users browsing this forum: Gaston and 3 guests