Programming error with sam-ba 2.12

Moderator: nferre

Posts: 9
Joined: Wed Jun 11, 2014 7:24 pm

Programming error with sam-ba 2.12

Wed Jun 11, 2014 10:00 pm


I am getting the following error to program a demo image:

Code: Select all

-I- Waiting ...
-I- TCL platform : Windows NT
-I- SAM-BA 2.12  on : windows
current connection is \jlink\ARM0, \\jlink\\ARM0 to be matched 
-I- Retrieved arguments from command line :
-I- argv 0 : \jlink\ARM0
-I- argv 1 : at91sama5d3x-ek
-I- argv 2 : demo_linux_nandflash.tcl
-I- Connection : \jlink\ARM0 (target(comType) = 2)
-I- Board : at91sama5d3x-ek
-I- Traces Level : 4
-I- target(handle) : 50165872
Read device Chip ID at 0xfffff240 --- get 0x00000000
Read device Chip ID at 0xffffee40 --- get 0x8a5c07c2
-I- Found processor : at91sama5d3x (Chip ID : 0x8a5c07c2)
sourcing device file C:/Program Files (x86)/Atmel/sam-ba_2.12/sam-ba.exe/../tcl_lib/devices/at91sama5d3x.tcl
sourcing board description file C:/Program Files (x86)/Atmel/sam-ba_2.12/sam-ba.exe/../tcl_lib/at91sama5d3x-ek/at91sama5d3x-ek.tcl
-I- Loading applet applet-lowlevelinit-sama5d3x.bin at address 0x308000
-E- Error during Low level initialization.
-E- Low level initialization is required to run applets.
-E- Connection abort!
Any idea?

Best regards,
João Paulo
Site Admin
Posts: 204
Joined: Wed Feb 14, 2007 11:17 am

Re: Programming error with sam-ba 2.12

Fri Jun 13, 2014 10:02 am


Try the patch7 for sam-ba that is available on website.

I do not know if it is related, but it can be worth trying.

I would also recomend to try to connect through USB instead of JTAG.

Best regards,

Return to “SAMA5-based”

Who is online

Users browsing this forum: No registered users and 1 guest