ATSAMA5D27 Linux booting problem

Discussion around products based on ARM Cortex-A5 core.

Moderator: nferre

DeepakNS
Posts: 1
Joined: Thu May 23, 2019 11:08 am

ATSAMA5D27 Linux booting problem

Thu May 23, 2019 11:28 am

Hello Everybody, I am working on ATSAM5D27 board and now i am facing one issue on booting time here below i given below the bootlog. At the booting time stuck with this print :- libphy: MACB_mii_bus: probed.

0x000000000000-0x000000010000 : "at91bootstrap"
0x000000010000-0x0000000b0000 : "bootloader"
0x0000000b0000-0x0000000c0000 : "bootloader env"
0x0000000c0000-0x0000000e0000 : "device tree"
0x0000000e0000-0x0000004e0000 : "kernel"
atmel_spi f8000000.spi: DMA TX channel not available, SPI unable to use DMA
atmel_spi f8000000.spi: Atmel SPI Controller using PIO only
atmel_spi f8000000.spi: Using FIFO (16 data)
atmel_spi f8000000.spi: Atmel SPI Controller version 0x311 at 0xf8000000 (irq 30)
atmel_spi fc018400.spi: DMA TX channel not available, SPI unable to use DMA
atmel_spi fc018400.spi: Atmel SPI Controller using PIO only
atmel_spi fc018400.spi: Using FIFO (16 data)
atmel_spi fc018400.spi: Atmel SPI Controller version 0x311 at 0xfc018400 (irq 180)
libphy: Fixed MDIO Bus: probed
CAN device driver interface
m_can fc050000.can: m_can device registered (irq=49, version=31)
libphy: MACB_mii_bus: probed
blue_z
Location: USA
Posts: 1960
Joined: Thu Apr 19, 2007 10:15 pm

Re: ATSAMA5D27 Linux booting problem

Thu May 23, 2019 11:27 pm

DeepakNS wrote: I am working on ATSAM5D27 board and now i am facing one issue on booting time here below i given below the bootlog. At the booting time stuck with this print :- libphy: MACB_mii_bus: probed.
A snippet of the boot log is not sufficient. You need to provide a lot more context.
Study How To Ask Questions The Smart Way.

What board are you using, and how have you tested its functionality?
Has this board ever successfully booted Linux?

Regards

Return to “SAMA5D Cortex-A5 MPU”

Who is online

Users browsing this forum: No registered users and 2 guests