Page 1 of 1

Boot from mmc 1

Posted: Wed Jul 11, 2018 4:27 pm
by tmoSL
I have a new custom card based on SAMA5D3, Xplained board, but has mmc 1 (micro SD card), not mmc 0. I booted from NAND flash to U-boot, and can see mmc 1, but it doesn't boot from mmc 1. Does BootROM check to boot from mmc 1, if mmc 0 is not available?

Re: Boot from mmc 1

Posted: Fri Jul 13, 2018 11:16 pm
by blue_z
No, for Rev. A chips, boot using MCI1 does not work.

Regards