Page 1 of 1

How to enable SDIO of SAMA5D2?

Posted: Tue Oct 10, 2017 11:21 am
by arudzins
Hello,

I can't find that in documentation: how to tell SDMMC interface of SAMA5D2 to operate in SDIO mode?

Best regards,
Adam

Re: How to enable SDIO of SAMA5D2?

Posted: Tue Oct 10, 2017 11:06 pm
by blue_z
> I can't find that in documentation: how to tell SDMMC interface of SAMA5D2 to operate in SDIO mode?

In what "documentation" are you looking?
There's a section on that topic in the SoC datasheet that seems clear enough:
51.9 SD/SDIO Operating Mode

The SDMMC is fully compliant with the “SD Host Controller Simplified Specification V3.00” for SD/SDIO devices.
Refer to this specification for SDMMC configuration.

iOW you need to fetch another document from sdcard.org.

Regards

Re: How to enable SDIO of SAMA5D2?

Posted: Thu Oct 12, 2017 9:54 am
by arudzins
Microchip's support has explained to me, that the controller automatically enters SDIO mode based on the current command. That's what I needed to know.
Best regards,
Ada,

Re: How to enable SDIO of SAMA5D2?

Posted: Tue Oct 24, 2017 11:52 am
by lz6661
On our MYD-JA5D27 board, the SDIO is through MMC interface, it needs to add SDIO device and relative driver.
http://www.myirtech.com/list.asp?id=554