where to get a toolchain for at91sam9g20 now

[presssaft]

It is written in the SAM-BA User Guide (from SAM-BA v2.16) in chapter "8.5 Build Applets" you need a toolchain and you can get one from http://www.codesourcery.com/ … well not anymore. As far as I understand, you need a toolchain for ARMv5 bare metal. Do I have to compile it by myself or is there any other source for a working binary toolchain?

[tsvoipio]

The processor core is ARM926. The arm-none-eabi toolset should be OK for raw metal. It depends on your development computer operating system where to get the toolset, google for it.

--

-TV