Page 1 of 1


Posted: Fri Oct 10, 2014 4:59 pm
by femia
Hello to all,

i tried to access the SD card from the SAMA5D3Xplained board through SAM-BA applet but everytime the programm crashes.
The reason for this is that i intend to use in our device an emmc chip as boot and linux system and which is empty when it is assemblied on the pcb board.
Initially the applet load the sdmmc-massstorage.bin file when the script "Launch SDMMC Massstorage" is executed. I replaced the sdmmc-massstorage.bin with the applet-sdmmc-sama5d3x.bin but without any success. It crashes also.
So my question is what i'm doing wrong?

Any suggestions are welcome.