Recompiled Source don't work

Microchip in-system programming solution: SAM-BA

Moderators: nferre, fab

buser
Location: Riesa (Germany)
Posts: 3
Joined: Mon Jul 30, 2007 12:42 pm

Recompiled Source don't work

Mon Jan 25, 2010 7:31 pm

In preperation of costumization the sam-ba applets, I try to recompile the code of at91sam9263-ek. The make process ends without errors, but the binaries don't work. Sam-Ba will be dead.
Witch version of CodeSourcery should I use. Currently I use 2009q3-68. But the binaries are bigger than the installed originals

e.g: isp-extram-at91sam9263.bin orginal 4644 byte recompiled 4940 byte

Any sugestions?

Thanx Jens
buser
Location: Riesa (Germany)
Posts: 3
Joined: Mon Jul 30, 2007 12:42 pm

Re: Recompiled Source don't work

Tue Jan 26, 2010 4:14 pm

I have found the error by myself.

I build the isp-extram- for target sdram instead of sram
sjremya
Posts: 12
Joined: Thu Sep 09, 2010 2:42 pm

Re: Recompiled Source don't work

Fri Sep 24, 2010 9:19 am

Hi

Could you please guide me to re-compile SAM-BA ?

I have SAM-BA v2.8 in windows xp machine. Since my sdram gives issues, i would like to rework on SAM-BA source.

Do I need any specified compiler for it?
Can I use a gcc compiler for it ?

The error message is as follows:

Code: Select all

make CHIP=at91sam9260 BOARD=at91sam9260-ek MEMORY=sram_samba DYN_TRACES=1

arm-none-eabi-gcc -g -Os -I../../at91lib/boards/at91sam9260-ek -I../../at91lib/peripherals  -I../../at91lib/components -I../../at91lib -Dat91sam9260 -D__ASSEMBLY__ -c -o obj/isp_cstartup.o ../common/isp_cstartup.S

make: arm-none-eabi-gcc: Command not found

make: *** [obj/isp_cstartup.o] Error 127

Please help me. Thanks in advance
SJR

Return to “SAM-BA”

Who is online

Users browsing this forum: No registered users and 1 guest