Sam3x8e Watchdog doesn't work while debugging

Discussion around product based on ARM Cortex M3 core.

Moderators: nferre, ncollot
Posts: 3
Joined: Mon Dec 07, 2015 7:39 pm

Sam3x8e Watchdog doesn't work while debugging

Sat Feb 13, 2016 2:27 am

I am using the sam3x8e with the watchdog enabled.

The watchdog will reset the micro when I am not debugging however, if I am debugging with the Atmel ICE3 debugger the watchdog does not work.
Also, when I am debugging if I view the watchdog config registers in the watch window (Atmel studio 6.2) the WDT_MR register does not update with the correct value when I step over it...

I assume the watchdog is suppose to work in debug mode considering there are config options to halt the watchdog timer when debugging or in idle mode.

Anyone experience similar behavior?

Return to “SAM3 Cortex-M3 MCU”

Who is online

Users browsing this forum: No registered users and 1 guest