Help! I can not use ethernet to download Wince6.0 Image

This forum is for users of Atmel's SAM Series and who are interested in using WinCE OS.

Moderator: nferre

zxb200910
Posts: 3
Joined: Thu Dec 13, 2012 9:11 am

Help! I can not use ethernet to download Wince6.0 Image

Thu Dec 13, 2012 9:28 am

I use sam9263EK board
XImageStart = 0x8006C000, ImageLength = 0x15904E0, LaunchAddr = 0x8006D000

Completed file(s):
-------------------------------------------------------------------------------
[0]: Address=0x8006C000 Length=0x15904E0 Name="" Target=RAM
ROMHDR at Address 8006C044h
Got EDBG_CMD_JUMPIMG
Got EDBG_CMD_CONFIG, flags:0x00000000
RomBOOT
>
INFO : Low Level Init : OK
Init Nand flash
Starting eboot ...
FMD_DirectRead lasted 0 ms for 0x46 bytes (timer granularity is 400)

Press [ENTER] to download now or [SPACE] to cancel.
Initiating image download in 0 seconds
System ready!
Preparing for download...

INFO: Trying to initialize the internal NIC (EMACB)...
pEmac->EMAC_SA1L= 72721200
pEmac->EMAC_SA1H= 2020
Init Emac Ethernet controler
Enter in AT91F_EmacEntry base = 0xbffbc000
EMACB revision 0x1010c
->Enter in AT91F_EMACInit
Found Phy (DM9161A) at address 0
CONTROL REG : 0x3100
STATUS REG : 0x7869
CONTROL REG : 0x3100
STATUS REG : 0x786d

EMAC Init : 100 Mbit/s FULL DUPLEX (RMII)
EDBG:AT91Init Reading MAC address 0x1200 0x7272 0x2020
INFO: EMACB Ethernet controller initialized.
+EbootSendBootmeAndWaitForTftp
Sent BOOTME to 255.255.255.255
Packet has the following data:
boot.bin[NULL]octet[NULL]
TFTP packet could have 1 name/value pairs
Locked Down Link 1
Src IP 192.168.2.200 Port 03D4 Dest IP 192.168.2.178 Port 2337
Default TFTP block size set to: 512 bytes
There were no options detected in the TFTP
EthDown::TFTPD_OPEN::boot.bin
-EbootSendBootmeAndWaitForTftp

BL_IMAGE_TYPE_BIN

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXTX underrun, resetting buffers, status = 60
bForceTX
Sent Frame error
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXrom_offset=0x0.
XXImageStart = 0x8006C000, ImageLength = 0x15904E0, LaunchAddr = 0x8006D000

Completed file(s):
-------------------------------------------------------------------------------
[0]: Address=0x8006C000 Length=0x15904E0 Name="" Target=RAM
ROMHDR at Address 8006C044h
Got EDBG_CMD_JUMPIMG
Got EDBG_CMD_CONFIG, flags:0x00000000
RomBOOT
>
INFO : Low Level Init : OK
Init Nand flash
Starting eboot ...
FMD_DirectRead lasted 0 ms for 0x46 bytes (timer granularity is 400)

Press [ENTER] to download now or [SPACE] to cancel.
Initiating image download in 0 seconds
System ready!
Preparing for download...

INFO: Trying to initialize the internal NIC (EMACB)...
pEmac->EMAC_SA1L= 72721200
pEmac->EMAC_SA1H= 2020
Init Emac Ethernet controler
Enter in AT91F_EmacEntry base = 0xbffbc000
EMACB revision 0x1010c
->Enter in AT91F_EMACInit
Found Phy (DM9161A) at address 0
CONTROL REG : 0x3100
STATUS REG : 0x7869
CONTROL REG : 0x3100
STATUS REG : 0x786d

EMAC Init : 100 Mbit/s FULL DUPLEX (RMII)
EDBG:AT91Init Reading MAC address 0x1200 0x7272 0x2020
INFO: EMACB Ethernet controller initialized.
+EbootSendBootmeAndWaitForTftp
Sent BOOTME to 255.255.255.255
Packet has the following data:
boot.bin[NULL]octet[NULL]
TFTP packet could have 1 name/value pairs
Locked Down Link 1
Src IP 192.168.2.200 Port 03D4 Dest IP 192.168.2.178 Port 2346
Default TFTP block size set to: 512 bytes
There were no options detected in the TFTP
EthDown::TFTPD_OPEN::boot.bin
-EbootSendBootmeAndWaitForTftp

BL_IMAGE_TYPE_BIN

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXTX underrun, resettin
g buffers, status = 60
bForceTX
Sent Frame error
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXTX underrun, resetting buffers, status = 60
bForceTX
Sent Frame error
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXrom_offset=0x0.
XXImageStart = 0x8006C000, ImageLength = 0x15904E0, LaunchAddr = 0x8006D000

Completed file(s):
-------------------------------------------------------------------------------
[0]: Address=0x8006C000 Length=0x15904E0 Name="" Target=RAM
ROMHDR at Address 8006C044h
Got EDBG_CMD_JUMPIMG
Got EDBG_CMD_CONFIG, flags:0x00000000
RomBOOT
>
INFO : Low Level Init : OK
Init Nand flash
Starting eboot ...
FMD_DirectRead lasted 0 ms for 0x46 bytes (timer granularity is 400)

Press [ENTER] to download now or [SPACE] to cancel.
Initiating image download in 0 seconds
System ready!
Preparing for download...

INFO: Trying to initialize the internal NIC (EMACB)...
pEmac->EMAC_SA1L= 72721200
pEmac->EMAC_SA1H= 2020
Init Emac Ethernet controler
Enter in AT91F_EmacEntry base = 0xbffbc000
EMACB revision 0x1010c
->Enter in AT91F_EMACInit
Found Phy (DM9161A) at address 0
CONTROL REG : 0x3100
STATUS REG : 0x7869
CONTROL REG : 0x3100
STATUS REG : 0x786d

EMAC Init : 100 Mbit/s FULL DUPLEX (RMII)
EDBG:AT91Init Reading MAC address 0x1200 0x7272 0x2020
INFO: EMACB Ethernet controller initialized.
+EbootSendBootmeAndWaitForTftp
Sent BOOTME to 255.255.255.255
Packet has the following data:
boot.bin[NULL]octet[NULL]
TFTP packet could have 1 name/value pairs
Locked Down Link 1
Src IP 192.168.2.200 Port 03D4 Dest IP 192.168.2.178 Port 236A
Default TFTP block size set to: 512 bytes
There were no options detected in the TFTP
EthDown::TFTPD_OPEN::boot.bin
-EbootSendBootmeAndWaitForTftp

BL_IMAGE_TYPE_BIN

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXrom_offset=0x0.

XXImageStart = 0x8006C000, ImageLength = 0x15904E0, LaunchAddr = 0x8006D000

Completed file(s):
-------------------------------------------------------------------------------
[0]: Address=0x8006C000 Length=0x15904E0 Name="" Target=RAM
ROMHDR at Address 8006C044h
Got EDBG_CMD_JUMPIMG
Got EDBG_CMD_CONFIG, flags:0x00000000
RomBOOT
>
INFO : Low Level Init : OK
Init Nand flash
Starting eboot ...
FMD_DirectRead lasted 0 ms for 0x46 bytes (timer granularity is 400)

Press [ENTER] to download now or [SPACE] to cancel.
Initiating image download in 0 seconds
System ready!
Preparing for download...

INFO: Trying to initialize the internal NIC (EMACB)...
pEmac->EMAC_SA1L= 72721200
pEmac->EMAC_SA1H= 2020
Init Emac Ethernet controler
Enter in AT91F_EmacEntry base = 0xbffbc000
EMACB revision 0x1010c
->Enter in AT91F_EMACInit
Found Phy (DM9161A) at address 0
CONTROL REG : 0x3100
STATUS REG : 0x7869
CONTROL REG : 0x3100
STATUS REG : 0x786d

EMAC Init : 100 Mbit/s FULL DUPLEX (RMII)
EDBG:AT91Init Reading MAC address 0x1200 0x7272 0x2020
INFO: EMACB Ethernet controller initialized.
+EbootSendBootmeAndWaitForTftp
Sent BOOTME to 255.255.255.255
Packet has the following data:
boot.bin[NULL]octet[NULL]
TFTP packet could have 1 name/value pairs
Locked Down Link 1
Src IP 192.168.2.200 Port 03D4 Dest IP 192.168.2.178 Port 237F
Default TFTP block size set to: 512 bytes
There were no options detected in the TFTP
EthDown::TFTPD_OPEN::boot.bin
-EbootSendBootmeAndWaitForTftp

BL_IMAGE_TYPE_BIN

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXrom_offset=0x0.

XXImageStart = 0x8006C000, ImageLength = 0x15904E0, LaunchAddr = 0x8006D000

Completed file(s):
-------------------------------------------------------------------------------
[0]: Address=0x8006C000 Length=0x15904E0 Name="" Target=RAM
ROMHDR at Address 8006C044h
Got EDBG_CMD_JUMPIMG
Got EDBG_CMD_CONFIG, flags:0x00000000
RomBOOT
>
INFO : Low Level Init : OK
Init Nand flash
Starting eboot ...
FMD_DirectRead lasted 1 ms for 0x46 bytes (timer granularity is 400)

Press [ENTER] to download now or [SPACE] to cancel.
Initiating image download in 0 seconds
System ready!
Preparing for download...

INFO: Trying to initialize the internal NIC (EMACB)...
pEmac->EMAC_SA1L= 72721200
pEmac->EMAC_SA1H= 2020
Init Emac Ethernet controler
Enter in AT91F_EmacEntry base = 0xbffbc000
EMACB revision 0x1010c
->Enter in AT91F_EMACInit
Found Phy (DM9161A) at address 0
CONTROL REG : 0x3100
STATUS REG : 0x7869
CONTROL REG : 0x3100
STATUS REG : 0x786d

EMAC Init : 100 Mbit/s FULL DUPLEX (RMII)
EDBG:AT91Init Reading MAC address 0x1200 0x7272 0x2020
INFO: EMACB Ethernet controller initialized.
+EbootSendBootmeAndWaitForTftp
Sent BOOTME to 255.255.255.255
Packet has the following data:
boot.bin[NULL]octet[NULL]
TFTP packet could have 1 name/value pairs
Locked Down Link 1
Src IP 192.168.2.200 Port 03D4 Dest IP 192.168.2.178 Port 2391
Default TFTP block size set to: 512 bytes
There were no options detected in the TFTP
EthDown::TFTPD_OPEN::boot.bin
-EbootSendBootmeAndWaitForTftp

BL_IMAGE_TYPE_BIN

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXTX underrun, resetting buffers, status = 60
bForceTX
Sent Frame error
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXrom_offset=0x0.
XXImageStart = 0x8006C000, ImageLength = 0x15904E0, LaunchAddr = 0x8006D000

Completed file(s):
-------------------------------------------------------------------------------
[0]: Address=0x8006C000 Length=0x15904E0 Name="" Target=RAM
ROMHDR at Address 8006C044h
Got EDBG_CMD_JUMPIMG
Got EDBG_CMD_CONFIG, flags:0x00000000
RomBOOT
>
INFO : Low Level Init : OK
Init Nand flash
Starting eboot ...
FMD_DirectRead lasted 0 ms for 0x46 bytes (timer granularity is 400)

Press [ENTER] to download now or [SPACE] to cancel.
Initiating image download in 0 seconds
System ready!
Preparing for download...

INFO: Trying to initialize the internal NIC (EMACB)...
pEmac->EMAC_SA1L= 72721200
pEmac->EMAC_SA1H= 2020
Init Emac Ethernet controler
Enter in AT91F_EmacEntry base = 0xbffbc000
EMACB revision 0x1010c
->Enter in AT91F_EMACInit
Found Phy (DM9161A) at address 0
CONTROL REG : 0x3100
STATUS REG : 0x7869
CONTROL REG : 0x3100
STATUS REG : 0x786d

EMAC Init : 100 Mbit/s FULL DUPLEX (RMII)
EDBG:AT91Init Reading MAC address 0x1200 0x7272 0x2020
INFO: EMACB Ethernet controller initialized.
+EbootSendBootmeAndWaitForTftp
Sent BOOTME to 255.255.255.255
Packet has the following data:
boot.bin[NULL]octet[NULL]
TFTP packet could have 1 name/value pairs
Locked Down Link 1
Src IP 192.168.2.200 Port 03D4 Dest IP 192.168.2.178 Port 23CA
Default TFTP block size set to: 512 bytes
There were no options detected in the TFTP
EthDown::TFTPD_OPEN::boot.bin
-EbootSendBootmeAndWaitForTftp

BL_IMAGE_TYPE_BIN

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXrom_offset=0x0.

XXImageStart = 0x8006C000, ImageLength = 0x15904E0, LaunchAddr = 0x8006D000

Completed file(s):
-------------------------------------------------------------------------------
[0]: Address=0x8006C000 Length=0x15904E0 Name="" Target=RAM
ROMHDR at Address 8006C044h
Got EDBG_CMD_JUMPIMG
Got EDBG_CMD_CONFIG, flags:0x00000000
RomBOOT
>
INFO : Low Level Init : OK
Init Nand flash
Starting eboot ...
FMD_DirectRead lasted 0 ms for 0x46 bytes (timer granularity is 400)

Press [ENTER] to download now or [SPACE] to cancel.
Initiating image download in 0 seconds
System ready!
Preparing for download...

INFO: Trying to initialize the internal NIC (EMACB)...
pEmac->EMAC_SA1L= 72721200
pEmac->EMAC_SA1H= 2020
Init Emac Ethernet controler
Enter in AT91F_EmacEntry base = 0xbffbc000
EMACB revision 0x1010c
->Enter in AT91F_EMACInit
Found Phy (DM9161A) at address 0
CONTROL REG : 0x3100
STATUS REG : 0x7869
CONTROL REG : 0x3100
STATUS REG : 0x786d

EMAC Init : 100 Mbit/s FULL DUPLEX (RMII)
EDBG:AT91Init Reading MAC address 0x1200 0x7272 0x2020
INFO: EMACB Ethernet controller initialized.
+EbootSendBootmeAndWaitForTftp
Sent BOOTME to 255.255.255.255
Packet has the following data:
boot.bin[NULL]octet[NULL]
TFTP packet could have 1 name/value pairs
Locked Down Link 1
Src IP 192.168.2.200 Port 03D4 Dest IP 192.168.2.178 Port 23EA
Default TFTP block size set to: 512 bytes
There were no options detected in the TFTP
EthDown::TFTPD_OPEN::boot.bin
-EbootSendBootmeAndWaitForTftp

BL_IMAGE_TYPE_BIN

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXTX underrun, resetting buffers, status = 60
bForceTX
Sent Frame error
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXrom_offset=0x0.
XXImageStart = 0x8006C000, ImageLength = 0x15904E0, LaunchAddr = 0x8006D000

Completed file(s):
-------------------------------------------------------------------------------
[0]: Address=0x8006C000 Length=0x15904E0 Name="" Target=RAM
ROMHDR at Address 8006C044h
Got EDBG_CMD_JUMPIMG
Got EDBG_CMD_CONFIG, flags:0x00000000

Return to “WinCE”

Who is online

Users browsing this forum: No registered users and 1 guest