SOLVED. Change of gpio-pin conn.to PHY-interrupt output

This forum is for users of Atmel's SAM Series and who are interested in using WinCE OS.

Moderator: nferre

timmf
Posts: 4
Joined: Mon Sep 13, 2010 8:58 am

SOLVED. Change of gpio-pin conn.to PHY-interrupt output

Fri Jan 20, 2012 9:37 am

Hello,

Regarding the at91sam9g20 wince600 bsp V0.10 from adeneo:

How can I change the processor-gpio-pin to which the ethernet phy's interrupt output is connected to?

Is the dm9161 PHY's interrupt output generally needed to do ethernet communication? Or is the AT91's EMAC notified that the PHY received packets over ethernet only through RMII / MII interface?


Thanks in advance.
Last edited by timmf on Fri Jan 20, 2012 11:26 am, edited 1 time in total.
timmf
Posts: 4
Joined: Mon Sep 13, 2010 8:58 am

Re: SAM9G20 BSP: Change of gpio-pin conn.to PHY-interrupt ou

Fri Jan 20, 2012 11:25 am

Hello,

this is solved. The PHY interrupt isn't used at all in the AT91SAM9G20 bsp.

I confused the PHY interrupt with the EMAC interrupt.

Return to “WinCE”

Who is online

Users browsing this forum: No registered users and 1 guest