Launcing Custom WinCE 6.0 OS AT91SAM9G45 Problem

This forum is for users of Atmel's SAM Series and who are interested in using WinCE OS.

Moderator: nferre

ahkhalid
Posts: 4
Joined: Tue Nov 16, 2010 5:46 am

Launcing Custom WinCE 6.0 OS AT91SAM9G45 Problem

Mon Feb 28, 2011 8:49 am

Hello All,

I am currently developing on an Embest SAM9G45 ARM9 Board.
The FIRSTBOOT.nb0, EBOOT.nb0 and NK.nb0 files provided by Embest work properly via SAM-BA v2.9. The WinCE image is written to flash and loads and works properly.

Problem:
I have added my own components to the WinCE and everything compiles just fine (warnings but no errors).
I am now trying to download the WinCE image via PB Ethernet. It download but does not launch the image. It hangs up after:

--- Real timings ---
---------------------------------------
dwNWE_SETUP 16
dwNCS_WR_SETUP 0
dwNRD_SETUP 16
dwNCS_RD_SETUP 0
dwNWE_PULSE 16
dwNCS_WR_PULSE 56
dwNRD_PULSE 16
dwNCS_RD_PULSE 56
dwNRD_CYCLE 56
dwNWE_CYCLE 56
Using Software ECC
Addresses[0]: 0, Addresses[1]: 0
Nand Disk Space is invalid, Using default values

If I reset the board it gets stuck at:
Launching windows CE image by jumping at address 0x7006d000

I have also tried to download via SAM-BA v2.9 and it hangs up on:

Launching windows CE image by jumping at address 0x7006d000

and the restarts and hangs and so on.

I am fairly new to Embedded CE development and any help will be appreciated.

Thanks and best regards,

AK
Alamo
Posts: 4
Joined: Thu Feb 17, 2011 12:34 pm

Re: Launcing Custom WinCE 6.0 OS AT91SAM9G45 Problem

Thu Mar 10, 2011 4:53 pm

Download from SAMBA (usb):
- reset board
- enable nand flash and upload your image (firstboot.nb0 eboot.nb0 and nk.nb0)
- running eboot and type manual address see build.log for new address

Download from PB (ethernet):
- make sure your eboot running or using samba first to upload firstboot.nb0 and eboot.nbo
- configure eboot to download image to Flash and download new image at startup
- Attach device from PB
- restart board
- wait until downloading finish
- restart board and configure eboot again to Launch existing flash resident image to startup

note:
when building image see hive registry, nand flash
ahkhalid
Posts: 4
Joined: Tue Nov 16, 2010 5:46 am

Re: Launcing Custom WinCE 6.0 OS AT91SAM9G45 Problem

Fri Mar 11, 2011 1:12 am

Hi Alamo,

First of all thank you very much for taking the time to reply. Its really appreciated.

I have tried both the SAMBA and PB methods and get the same result. I am guessing that it may have something to do with the AT91SAM9G45 Touchscreen code. Its when it goes through that code (seen via debugger) that things appear to not work correctly.

Right after the download via PB the Splash screen goes goes digitally fuzzy (not sure if that makes sense) and then when it runs the AT91SAM9G45_Touchscreen.dll the screen goes blank. I also get
"PB Debugger Loaded 'AT91SAM9G45M10EK_TOUCHSCREEN.DL', no matching symbolic information found."

Also I am not sure what you meant by "when building image see hive registry, nand flash". If you mean under Catalog View->Third Party->BSP->AT91SAM9G45->Ethernet Bootloader->Nandflash Bootloader - then yes I have that selected. However if I select Catalog View->Third Party->BSP->AT91SAM9G45->Saved Registry->Registry saved in NAND Flash (Hive) I get error when I download.

The follwoing is what I get in the PB debugger after the image has downloaded. I currently download to SDRAM, because if I do in flash then I do not seem to boot properly:

PB Debugger The Kernel Debugger is waiting to connect with target.
142 PID:0 TID:2 Firmware Init Done.
3888 PID:0 TID:2 +OEMInitWatchDogTimer
3905 PID:400002 TID:410002 OSAXST1: >>> Loading Module 'kd.dll' (0x80055764) at address 0xC0010000-0xC0034000 in Process 'NK.EXE' (0x80948308)
3906 PID:400002 TID:410002 KD: Starting kernel debugger software probe (KdStub) - KD API version 22
3906 PID:400002 TID:410002 OSAXST1: >>> Loading Module 'NK.EXE' (0x80948308) at address 0x8006C000-0x8007C000 in Process 'NK.EXE' (0x80948308)
PB Debugger Kernel debugger connected.
PB Debugger The Kernel Debugger connection has been established (Target CPU is ARM).
PB Debugger Target name: AtmelSAM9G45
PB Debugger Probe name: KdStub
PB Debugger Binary Image should be loaded at 0x8006c000 / Data relocated at 0x80906000
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\NK.EXE'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\COREDLL.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\KERNEL.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\KITL.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\OALIOCTL.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\HD.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\OSAXST0.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\OSAXST1.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\K.COREDLL.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\KD.DLL'
6225 PID:400002 TID:410002 HD: Immediate debugger module load notifications ACTIVE (slower boot - non real-time).
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\FILESYS.DLL'
6234 PID:400002 TID:630002 OSAXST1: >>> Loading Module 'filesys.dll' (0x80031240) at address 0xC0130000-0xC017C000 in Process 'NK.EXE' (0x80948308)
6450 PID:400002 TID:630002 OSAXST1: >>> Loading Module 'k.fpcrt.dll' (0x80031378) at address 0xC0110000-0xC0122000 in Process 'NK.EXE' (0x80948308)
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\K.FPCRT.DLL'
6507 PID:400002 TID:630002 OSAXST1: >>> Loading Module 'fsdmgr.dll' (0x800314C0) at address 0xC0360000-0xC0383000 in Process 'NK.EXE' (0x80948308)
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\FSDMGR.DLL'
6563 PID:400002 TID:680002 +OALIoCtlHalInitRTC(...)
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\ROMFSD.DLL'
6563 PID:400002 TID:680002 -OALIoCtlHalInitRTC(rc = 0)
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\RELFSD.DLL'
6565 PID:400002 TID:680002 OSAXST1: >>> Loading Module 'romfsd.dll' (0x8001060C) at address 0xC0180000-0xC0186000 in Process 'NK.EXE' (0x80948308)
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\SHELL.EXE'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\TOOLHELP.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\DEVICE.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\DEVMGR.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\K.CEDDK.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\PM.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\BUSENUM.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\UDEVICE.EXE'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\NOTIFY.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\TAPI.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\UNIMODEM.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\AT91SAM9G45M10EK_USBHSFN.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\PMC.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\SERIALUSBFN.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\AT91SAM9G45M10EK_NANDFLASH.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\GPIO.DLL'
6614 PID:400002 TID:680002 OSAXST1: >>> Loading Module 'relfsd.dll' (0x850FB408) at address 0xC0340000-0xC034A000 in Process 'NK.EXE' (0x80948308)
6901 PID:e40002 TID:e50002 OSAXST1: >>> Loading Module 'coredll.dll' (0x80056630) at address 0x40010000-0x40087000 in Process 'shell.exe' (0x850F6A2C)
6919 PID:e40002 TID:e50002 OSAXST1: >>> Loading Module 'shell.exe' (0x850F6A2C) at address 0x00010000-0x00022000 in Process 'shell.exe' (0x850F6A2C)
6944 PID:400002 TID:e50002 OSAXST1: >>> Loading Module 'toolhelp.dll' (0x850C745C) at address 0x400F0000-0x400F6000 in Process 'NK.EXE' (0x80948308)
6976 PID:e40002 TID:e50002 OSAXST1: >>> Loading Module 'toolhelp.dll' (0x850C745C) at address 0x400F0000-0x400F6000 in Process 'shell.exe' (0x850F6A2C)
7002 PID:400002 TID:680002 OSAXST1: >>> Loading Module 'device.dll' (0x850C75A4) at address 0xC0280000-0xC0285000 in Process 'NK.EXE' (0x80948308)
7049 PID:400002 TID:680002 OSAXST1: >>> Loading Module 'devmgr.dll' (0x850C76EC) at address 0xC0290000-0xC02A2000 in Process 'NK.EXE' (0x80948308)
7069 PID:400002 TID:680002 OSAXST1: >>> Loading Module 'k.ceddk.dll' (0x850C7834) at address 0xC03A0000-0xC03A9000 in Process 'NK.EXE' (0x80948308)
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\NDIS.DLL'
7102 PID:400002 TID:680002 OSAXST1: >>> Loading Module 'pm.dll' (0x850C797C) at address 0xC02D0000-0xC02D6000 in Process 'NK.EXE' (0x80948308)
7147 PID:400002 TID:e60002 OSAXST1: >>> Loading Module 'busenum.dll' (0x850BC934) at address 0xC02C0000-0xC02C7000 in Process 'NK.EXE' (0x80948308)
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\CXPORT.DLL'
7186 PID:1150002 TID:1160002 OSAXST1: >>> Loading Module 'coredll.dll' (0x80056630) at address 0x40010000-0x40087000 in Process 'udevice.exe' (0x850B7924)
PB Debugger Loaded 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\RSAENH.DLL', no matching symbolic information found.
7203 PID:1150002 TID:1160002 OSAXST1: >>> Loading Module 'udevice.exe' (0x850B7924) at address 0x00010000-0x00016000 in Process 'udevice.exe' (0x850B7924)
7228 PID:400002 TID:e60002 OSAXST1: >>> Loading Module 'notify.dll' (0x850AF7FC) at address 0x400B0000-0x400BD000 in Process 'NK.EXE' (0x80948308)
7251 PID:1150002 TID:e60002 OSAXST1: >>> Loading Module 'notify.dll' (0x850AF7FC) at address 0x400B0000-0x400BD000 in Process 'udevice.exe' (0x850B7924)
7273 PID:400002 TID:e60002 OSAXST1: >>> Loading Module 'tapi.dll' (0x8506F518) at address 0xC0590000-0xC05A6000 in Process 'NK.EXE' (0x80948308)
7308 PID:400002 TID:e60002 OSAXST1: >>> Loading Module 'unimodem.dll' (0x8506F7AC) at address 0xC05B0000-0xC05BF000 in Process 'NK.EXE' (0x80948308)
7336 PID:400002 TID:e60002 OSAXST1: >>> Loading Module 'at91sam9g45m10ek_usbhsfn.dll' (0x8506FB48) at address 0xC0720000-0xC0733000 in Process 'NK.EXE' (0x80948308)
7376 PID:400002 TID:e60002 OSAXST1: >>> Loading Module 'pmc.dll' (0x8506FDF8) at address 0xC06B0000-0xC06B5000 in Process 'NK.EXE' (0x80948308)
7398 PID:400002 TID:e60002 +CUSBHSFN::Init()
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\VMINI.DLL'
7406 PID:400002 TID:1410002 UDPHS IT: Thread started
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\ASYNCMAC.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\PPPOE.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\MSPART.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\VEIM.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\K.DHCPSRV.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\AFD.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\PPP.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\WS2K.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\TCPSTK.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\EXFAT.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\DHCP.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\NETBIOS.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\DISKCACHE.DLL'
PB Debugger Unloaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\DISKCACHE.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\AUTORAS.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\K.IPHLPAPI.DLL'
PB Debugger Unloaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\EXFAT.DLL'
7407 PID:400002 TID:e60002 -CUSBHSFN::Init()
7409 PID:400002 TID:e60002 OSAXST1: >>> Loading Module 'serialusbfn.dll' (0x8506DDA4) at address 0xC0630000-0xC063C000 in Process 'NK.EXE' (0x80948308)
7434 PID:400002 TID:e60002 +CUSBHSFN::InitEndpoint(0)
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\WS2INSTL.DLL'
7434 PID:400002 TID:e60002 -CUSBHSFN::InitEndpoint(0)
7434 PID:400002 TID:e60002 IOControl IOCTL_BUS_GET_POWER_STATE(D0)
7555 PID:400002 TID:1410002 USB Function run in HighSpeed mode
7555 PID:400002 TID:1410002 UDPHS IT: Cable Attach
7555 PID:400002 TID:1410002 USB Function driver use DMA
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\UDEVICE.EXE'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\WS2SERV.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\WS2.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\NDISUIO.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\NDISPWR.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\ETHMAN.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\IPHLPAPI.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\GWES.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\SERVICESSTART.EXE'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\AT91SAM9G45M10EK_DDI.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\SERVICESENUM.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\MGTT_O.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\KBDMOUSE.DLL'
PB Debugger Loaded 'AT91SAM9G45M10EK_TOUCHSCREEN.DL', no matching symbolic information found.
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\SERVICESD.EXE'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\OLE32.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\TOUCHCALIBRATE1.EXE'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\OBEXSRVR.DLL'
PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\WSPM.DLL'
PB Debugger Unloaded symbols for 'E:\WINCE600\OSDESIGNS\TESTSAM9G45OS\TESTSAM9G45OS\RELDIR\AT91SAM9G45M10EK_ARMV4I_RELEASE\SERVICESSTART.EXE'
7651 PID:400002 TID:1410002 Set USBHS in addressed mode!
8198 PID:400002 TID:1410002 +CUSBHSFN::InitEndpoint(1)
8198 PID:400002 TID:1410002 -CUSBHSFN::InitEndpoint(1)
8198 PID:400002 TID:1410002 +CUSBHSFN::InitEndpoint(2)
8198 PID:400002 TID:1410002 -CUSBHSFN::InitEndpoint(2)
8620 PID:400002 TID:e60002 OSAXST1: >>> Loading Module 'at91sam9g45m10ek_nandflash.dll' (0x8506ADEC) at address 0xC0710000-0xC071E000 in Process 'NK.EXE' (0x80948308)
8646 PID:400002 TID:e60002 OSAXST1: >>> Loading Module 'gpio.dll' (0x82DFA000) at address 0xC06A0000-0xC06A5000 in Process 'NK.EXE' (0x80948308)
8678 PID:400002 TID:e60002 Master Clock is 133347533 Hz
8678 PID:400002 TID:e60002 ---------------------------------------
8678 PID:400002 TID:e60002 --- Configuring Chip Select 3 ---
8678 PID:400002 TID:e60002 ---------------------------------------
8678 PID:400002 TID:e60002 --- Desired timings ---
8678 PID:400002 TID:e60002 ---------------------------------------
8678 PID:400002 TID:e60002 dwNWE_SETUP 0
8678 PID:400002 TID:e60002 dwNCS_WR_SETUP 0
8678 PID:400002 TID:e60002 dwNRD_SETUP 0
8678 PID:400002 TID:e60002 dwNCS_RD_SETUP 0
8678 PID:400002 TID:e60002 dwNWE_PULSE 28
8679 PID:400002 TID:e60002 dwNCS_WR_PULSE 60
8679 PID:400002 TID:e60002 dwNRD_PULSE 28
8679 PID:400002 TID:e60002 dwNCS_RD_PULSE 60
8679 PID:400002 TID:e60002 dwNRD_CYCLE 56
8679 PID:400002 TID:e60002 dwNWE_CYCLE 56
8679 PID:400002 TID:e60002 dwClockPeriod_ns 8
8679 PID:400002 TID:e60002 ---------------------------------------
8681 PID:400002 TID:e60002 --- Real timings ---
8681 PID:400002 TID:e60002 ---------------------------------------
8681 PID:400002 TID:e60002 dwNWE_SETUP 0
8681 PID:400002 TID:e60002 dwNCS_WR_SETUP 0
8681 PID:400002 TID:e60002 dwNRD_SETUP 0
8683 PID:400002 TID:e60002 dwNCS_RD_SETUP 0
8683 PID:400002 TID:e60002 dwNWE_PULSE 32
8683 PID:400002 TID:e60002 dwNCS_WR_PULSE 64
8683 PID:400002 TID:e60002 dwNRD_PULSE 32
8683 PID:400002 TID:e60002 dwNCS_RD_PULSE 64
8683 PID:400002 TID:e60002 dwNRD_CYCLE 64
8683 PID:400002 TID:e60002 dwNWE_CYCLE 64
8685 PID:400002 TID:e60002 Found Smug (0xec)- K9F2G08U0A (0xda)
8685 PID:400002 TID:e60002 Master Clock is 133347533 Hz
8685 PID:400002 TID:e60002 ---------------------------------------
8685 PID:400002 TID:e60002 --- Configuring Chip Select 3 ---
8685 PID:400002 TID:e60002 ---------------------------------------
8685 PID:400002 TID:e60002 --- Desired timings ---
8685 PID:400002 TID:e60002 ---------------------------------------
8685 PID:400002 TID:e60002 dwNWE_SETUP 10
8685 PID:400002 TID:e60002 dwNCS_WR_SETUP 0
8685 PID:400002 TID:e60002 dwNRD_SETUP 10
8685 PID:400002 TID:e60002 dwNCS_RD_SETUP 0
8685 PID:400002 TID:e60002 dwNWE_PULSE 15
8685 PID:400002 TID:e60002 dwNCS_WR_PULSE 50
8686 PID:400002 TID:e60002 dwNRD_PULSE 15
8686 PID:400002 TID:e60002 dwNCS_RD_PULSE 50
8686 PID:400002 TID:e60002 dwNRD_CYCLE 30
8686 PID:400002 TID:e60002 dwNWE_CYCLE 30
8686 PID:400002 TID:e60002 dwClockPeriod_ns 8
8686 PID:400002 TID:e60002 ---------------------------------------
8686 PID:400002 TID:e60002 --- Real timings ---
8686 PID:400002 TID:e60002 ---------------------------------------
8686 PID:400002 TID:e60002 dwNWE_SETUP 16
8686 PID:400002 TID:e60002 dwNCS_WR_SETUP 0
8686 PID:400002 TID:e60002 dwNRD_SETUP 16
8686 PID:400002 TID:e60002 dwNCS_RD_SETUP 0
8686 PID:400002 TID:e60002 dwNWE_PULSE 16
8686 PID:400002 TID:e60002 dwNCS_WR_PULSE 56
8686 PID:400002 TID:e60002 dwNRD_PULSE 16
8686 PID:400002 TID:e60002 dwNCS_RD_PULSE 56
8686 PID:400002 TID:e60002 dwNRD_CYCLE 56
8686 PID:400002 TID:e60002 dwNWE_CYCLE 56
8687 PID:400002 TID:e60002 Using Software ECC
8687 PID:400002 TID:e60002 Addresses[0]: 5ee9dd6d, Addresses[1]: ed5ff7fe
8688 PID:400002 TID:e60002 Nand Disk Space is invalid, Using default values
8858 PID:400002 TID:e60002 OSAXST1: >>> Loading Module 'ndis.dll' (0x82DFA764) at address 0xC04B0000-0xC04D4000 in Process 'NK.EXE' (0x80948308)
9016 PID:400002 TID:e60002 OSAXST1: >>> Loading Module 'cxport.dll' (0x82DFA9D4) at address 0xC0400000-0xC0409000 in Process 'NK.EXE' (0x80948308)
9097 PID:400002 TID:e60002 OSAXST1: >>> Loading Module 'rsaenh.dll' (0x82E04B40) at address 0xD06E0000-0xD070B000 in Process 'NK.EXE' (0x80948308)
9463 PID:400002 TID:e60002 OSAXST1: >>> Loading Module 'vmini.dll' (0x82E2EAEC) at address 0xC0520000-0xC0526000 in Process 'NK.EXE' (0x80948308)
9549 PID:400002 TID:e60002 OSAXST1: >>> Loading Module 'asyncmac.dll' (0x82E33708) at address 0xC03D0000-0xC03D7000 in Process 'NK.EXE' (0x80948308)
9646 PID:400002 TID:e60002 OSAXST1: >>> Loading Module 'pppoe.dll' (0x82E37588) at address 0xC03E0000-0xC03EF000 in Process 'NK.EXE' (0x80948308)
9683 PID:400002 TID:9f0002 OSAXST1: >>> Loading Module 'mspart.dll' (0x82E37850) at address 0xC0390000-0xC0399000 in Process 'NK.EXE' (0x80948308)
9710 PID:400002 TID:e60002 OSAXST1: >>> Loading Module 'veim.dll' (0x82E3E7A4) at address 0xC05E0000-0xC05E8000 in Process 'NK.EXE' (0x80948308)
9745 PID:400002 TID:e60002 OSAXST1: >>> Loading Module 'k.dhcpsrv.dll' (0x82E3E900) at address 0xC05F0000-0xC05F5000 in Process 'NK.EXE' (0x80948308)
9770 PID:400002 TID:e60002 OSAXST1: >>> Loading Module 'afd.dll' (0x82E3EC78) at address 0xC0490000-0xC04AD000 in Process 'NK.EXE' (0x80948308)
9811 PID:400002 TID:9f0002 One error detected and corrected. Sector 24584
9814 PID:400002 TID:9f0002 One error detected and corrected. Sector 24587
9815 PID:400002 TID:9f0002 One error detected and corrected. Sector 24831
9816 PID:400002 TID:e60002 OSAXST1: >>> Loading Module 'ppp.dll' (0x82E450C0) at address 0xC03B0000-0xC03CE000 in Process 'NK.EXE' (0x80948308)
9855 PID:400002 TID:e60002 OSAXST1: >>> Loading Module 'ws2k.dll' (0x82E451F8) at address 0xC0470000-0xC047F000 in Process 'NK.EXE' (0x80948308)
9881 PID:400002 TID:9f0002 One error detected and corrected. Sector 24584
10938 PID:400002 TID:e60002 OSAXST1: >>> Loading Module 'tcpstk.dll' (0x82E4AB1C) at address 0xC0530000-0xC058B000 in Process 'NK.EXE' (0x80948308)
10975 PID:400002 TID:9f0002 OSAXST1: >>> Loading Module 'exfat.dll' (0x82E515DC) at address 0xC02F0000-0xC0308000 in Process 'NK.EXE' (0x80948308)
11017 PID:400002 TID:e60002 OSAXST1: >>> Loading Module 'dhcp.dll' (0x82E51954) at address 0xC0510000-0xC051B000 in Process 'NK.EXE' (0x80948308)
11042 PID:400002 TID:e60002 OSAXST1: >>> Loading Module 'netbios.dll' (0x82E51B4C) at address 0xC05D0000-0xC05DD000 in Process 'NK.EXE' (0x80948308)
11071 PID:400002 TID:9f0002 One error detected and corrected. Sector 24831
11228 PID:400002 TID:9f0002 OSAXST1: >>> Loading Module 'diskcache.dll' (0x82E7B4C8) at address 0xC0310000-0xC0317000 in Process 'NK.EXE' (0x80948308)
11256 PID:400002 TID:9f0002 More than one error detected, unable to correct. Sector 25178
11256 PID:400002 TID:9f0002 More than one error detected, unable to correct. Sector 25178
11257 PID:400002 TID:9f0002 More than one error detected, unable to correct. Sector 25178
11258 PID:400002 TID:9f0002 More than one error detected, unable to correct. Sector 25178
11411 PID:400002 TID:9f0002 OSAXST1: <<< Unloading Module 'diskcache.dll' (0x82E7B4C8) at address 0xC0310000-0xC0317000 in Process 'NK.EXE' (0x80948308)
11444 PID:400002 TID:e60002 OSAXST1: >>> Loading Module 'autoras.dll' (0x82E51894) at address 0xC0500000-0xC0506000 in Process 'NK.EXE' (0x80948308)
11483 PID:400002 TID:e60002 OSAXST1: >>> Loading Module 'k.iphlpapi.dll' (0x82E51D20) at address 0xC0410000-0xC0420000 in Process 'NK.EXE' (0x80948308)
11514 PID:400002 TID:9f0002 OSAXST1: <<< Unloading Module 'exfat.dll' (0x82E515DC) at address 0xC02F0000-0xC0308000 in Process 'NK.EXE' (0x80948308)
13239 PID:400002 TID:e60002 OSAXST1: >>> Loading Module 'ws2instl.dll' (0x82FC9588) at address 0xC0440000-0xC0446000 in Process 'NK.EXE' (0x80948308)
16440 PID:2dd0002 TID:2de0002 OSAXST1: >>> Loading Module 'coredll.dll' (0x80056630) at address 0x40010000-0x40087000 in Process 'udevice.exe' (0x82FD9900)
16469 PID:2dd0002 TID:2de0002 OSAXST1: >>> Loading Module 'udevice.exe' (0x82FD9900) at address 0x00010000-0x00016000 in Process 'udevice.exe' (0x82FD9900)
16494 PID:400002 TID:e60002 OSAXST1: >>> Loading Module 'ws2serv.dll' (0x82FE45AC) at address 0x40210000-0x4021B000 in Process 'NK.EXE' (0x80948308)
16519 PID:2dd0002 TID:e60002 OSAXST1: >>> Loading Module 'ws2serv.dll' (0x82FE45AC) at address 0x40210000-0x4021B000 in Process 'udevice.exe' (0x82FD9900)
16548 PID:400002 TID:e60002 OSAXST1: >>> Loading Module 'ws2.dll' (0x82FE46E4) at address 0x401E0000-0x401ED000 in Process 'NK.EXE' (0x80948308)
16571 PID:2dd0002 TID:e60002 OSAXST1: >>> Loading Module 'ws2.dll' (0x82FE46E4) at address 0x401E0000-0x401ED000 in Process 'udevice.exe' (0x82FD9900)
16750 PID:400002 TID:e60002 OSAXST1: >>> Loading Module 'ndisuio.dll' (0x82FEA0E4) at address 0xC04E0000-0xC04E9000 in Process 'NK.EXE' (0x80948308)
16782 PID:400002 TID:e60002 OSAXST1: >>> Loading Module 'ndispwr.dll' (0x82FF0138) at address 0xC04F0000-0xC04F6000 in Process 'NK.EXE' (0x80948308)
16810 PID:400002 TID:e60002 OSAXST1: >>> Loading Module 'ethman.dll' (0x82FF04B0) at address 0x401B0000-0x401B6000 in Process 'NK.EXE' (0x80948308)
16835 PID:1150002 TID:e60002 OSAXST1: >>> Loading Module 'ethman.dll' (0x82FF04B0) at address 0x401B0000-0x401B6000 in Process 'udevice.exe' (0x850B7924)
16857 PID:400002 TID:e60002 OSAXST1: >>> Loading Module 'iphlpapi.dll' (0x82FF05E8) at address 0x401C0000-0x401D0000 in Process 'NK.EXE' (0x80948308)
16885 PID:1150002 TID:e60002 OSAXST1: >>> Loading Module 'iphlpapi.dll' (0x82FF05E8) at address 0x401C0000-0x401D0000 in Process 'udevice.exe' (0x850B7924)
16902 PID:1150002 TID:e60002 OSAXST1: >>> Loading Module 'ws2.dll' (0x82FE46E4) at address 0x401E0000-0x401ED000 in Process 'udevice.exe' (0x850B7924)
16930 PID:400002 TID:680002 OSAXST1: >>> Loading Module 'gwes.dll' (0x82FF0F0C) at address 0xC0190000-0xC023A000 in Process 'NK.EXE' (0x80948308)
16997 PID:3370002 TID:3380002 OSAXST1: >>> Loading Module 'coredll.dll' (0x80056630) at address 0x40010000-0x40087000 in Process 'servicesStart.exe' (0x82E6169C)
18313 PID:3370002 TID:3380002 OSAXST1: >>> Loading Module 'servicesStart.exe' (0x82E6169C) at address 0x00010000-0x00014000 in Process 'servicesStart.exe' (0x82E6169C)
18339 PID:3370002 TID:3380002 Initializating services for Services.exe
18342 PID:400002 TID:3340002 OSAXST1: >>> Loading Module 'at91sam9g45m10ek_ddi.dll' (0x82E707F8) at address 0xC06C0000-0xC06F6000 in Process 'NK.EXE' (0x80948308)
18377 PID:400002 TID:3340002 Display mode #0, 480x272x16bpp @ 0hz
18415 PID:400002 TID:3340002

Frame buffer is Uncached
18416 PID:400002 TID:3380002 OSAXST1: >>> Loading Module 'servicesenum.dll' (0x82E70C54) at address 0xC02E0000-0xC02E7000 in Process 'NK.EXE' (0x80948308)
18443 PID:400002 TID:3340002 Master Clock is 133347533 Hz
18443 PID:400002 TID:3340002 Config2DEngine
18445 PID:400002 TID:3340002 OSAXST1: >>> Loading Module 'mgtt_o.dll' (0x82E9287C) at address 0xC0240000-0xC0277000 in Process 'NK.EXE' (0x80948308)
18490 PID:400002 TID:3340002 OSAXST1: >>> Loading Module 'kbdmouse.dll' (0x82EE6324) at address 0xC0740000-0xC0749000 in Process 'NK.EXE' (0x80948308)
18532 PID:400002 TID:3340002 OSAXST1: >>> Loading Module 'at91sam9g45m10ek_touchscreen.dll' (0x82EE6F58) at address 0xC0700000-0xC0707000 in Process 'NK.EXE' (0x80948308)
18554 PID:400002 TID:3340002 Master Clock is 133347533 Hz
18559 PID:3490002 TID:34a0002 OSAXST1: >>> Loading Module 'coredll.dll' (0x80056630) at address 0x40010000-0x40087000 in Process 'servicesd.exe' (0x82E92180)
18576 PID:3490002 TID:34a0002 OSAXST1: >>> Loading Module 'servicesd.exe' (0x82E92180) at address 0x00010000-0x0001A000 in Process 'servicesd.exe' (0x82E92180)
18604 PID:3490002 TID:34a0002 OSAXST1: >>> Loading Module 'ws2.dll' (0x82FE46E4) at address 0x401E0000-0x401ED000 in Process 'servicesd.exe' (0x82E92180)
18622 PID:3490002 TID:34a0002 hello servicesd.exe $services_0002
18622 PID:3490002 TID:34a0002 OSAXST1: >>> Loading Module 'iphlpapi.dll' (0x82FF05E8) at address 0x401C0000-0x401D0000 in Process 'servicesd.exe' (0x82E92180)
18640 PID:400002 TID:34a0002 OSAXST1: >>> Loading Module 'ole32.dll' (0x82EFB180) at address 0x402A0000-0x402CE000 in Process 'NK.EXE' (0x80948308)
18677 PID:3490002 TID:34a0002 OSAXST1: >>> Loading Module 'ole32.dll' (0x82EFB180) at address 0x402A0000-0x402CE000 in Process 'servicesd.exe' (0x82E92180)
18707 PID:3820002 TID:3830002 OSAXST1: >>> Loading Module 'coredll.dll' (0x80056630) at address 0x40010000-0x40087000 in Process 'touchcalibrate1.exe' (0x82EFB438)
18735 PID:3820002 TID:3830002 OSAXST1: >>> Loading Module 'touchcalibrate1.exe' (0x82EFB438) at address 0x00010000-0x00014000 in Process 'touchcalibrate1.exe' (0x82EFB438)
18794 PID:400002 TID:3900002 OSAXST1: >>> Loading Module 'obexsrvr.dll' (0x82F08D6C) at address 0x40330000-0x4033B000 in Process 'NK.EXE' (0x80948308)
18823 PID:3490002 TID:3900002 OSAXST1: >>> Loading Module 'obexsrvr.dll' (0x82F08D6C) at address 0x40330000-0x4033B000 in Process 'servicesd.exe' (0x82E92180)
18846 PID:400002 TID:3970002 OSAXST1: >>> Loading Module 'wspm.dll' (0x850CF708) at address 0x401F0000-0x401F6000 in Process 'NK.EXE' (0x80948308)
18883 PID:3490002 TID:3970002 OSAXST1: >>> Loading Module 'wspm.dll' (0x850CF708) at address 0x401F0000-0x401F6000 in Process 'servicesd.exe' (0x82E92180)
18902 PID:3370002 TID:3380002 Completed initializating services for Services.exe
18903 PID:3370002 TID:3380002 OSAXST1: <<< Unloading Module 'coredll.dll' (0x80056630) at address 0x40010000-0x40087000 in Process 'servicesStart.exe' (0x82E6169C)
18920 PID:3370002 TID:3380002 OSAXST1: <<< Unloading Module 'servicesStart.exe' (0x82E6169C) at address 0x00010000-0x00014000 in Process 'servicesStart.exe' (0x82E6169C)

After that nothing happens. Screen Blank and I have to do a reset on the board.

Thanks and best regards,

AK
Alamo
Posts: 4
Joined: Thu Feb 17, 2011 12:34 pm

Re: Launcing Custom WinCE 6.0 OS AT91SAM9G45 Problem

Fri Mar 11, 2011 6:30 am

please test your board with linux first,

using samba and usb,
- reset board using userkey+Nrst or #nand erase from UBOOT
- running samba and connect to board
- click SAM9G45_nandflash.bat. Waiting about 3 minutes, SAM-BA will download the Linux images to the board automatically. After download, connect the development board with the PC using serial port line, then reset the board, you will see the Linux startup information in the HyperTerminal.

If your board OK you can continue testing wince 6...
Rgds,
Alamo
ahkhalid
Posts: 4
Joined: Tue Nov 16, 2010 5:46 am

Re: Launcing Custom WinCE 6.0 OS AT91SAM9G45 Problem

Fri Mar 11, 2011 6:36 am

Hello Alamo,

Thanks for the response.

The board was initially setup with Linux and was working fine. Also the WinCE images (FIRSTBOOT.nb0, EBOOT.nb0 and NK.nb0) provided by the manufacturer works perfectly fine on the board.

Its just my custom OS that is giving me a hard time; even building a custom OS following manufacturer documents is not running.

Thanks and best regards,

AK
Alamo
Posts: 4
Joined: Thu Feb 17, 2011 12:34 pm

Re: Launcing Custom WinCE 6.0 OS AT91SAM9G45 Problem

Fri Mar 11, 2011 7:55 am

the only problem when i'm build custom os, cause by image over 32MB and solved with change :
BOOL NandFlashPlatform_IsReserved(DWORD dwOffset)
{
if (dwOffset < 32*1024*1024) // The first 32MB are reserved and not accessible by the FAL
{
return TRUE;
}
else
{
return FALSE;
}
}

become 64*1024*1024,

hope you can success too.

cheers
ahkhalid
Posts: 4
Joined: Tue Nov 16, 2010 5:46 am

Re: Launcing Custom WinCE 6.0 OS AT91SAM9G45 Problem

Fri Mar 11, 2011 8:46 am

Hi Alamo,

Did that as well, same result.

Thanks and best regards,

AK

Return to “WinCE”

Who is online

Users browsing this forum: No registered users and 30 guests