When starting the actual sam-ba for linux I got the following error:
The loading of the applet seems to fail. This is the same error I get on windows.
Code: Select all
./sam-ba_64 -I- Waiting ... -I- TCL platform : Linux -I- SAM-BA CDC 2.16 on : linux -I- Connection : /dev/ttyACM0 (target(comType) = 0) -I- Board : at91sama5d3x-ek -I- Traces Level : 4 -I- target(handle) : file5 -I- sourcing board description file /home/user/tmp/tcl_lib/at91sama5d3x-ek/at91sama5d3x-ek.tcl Read device Chip ID at 0xFFFFEE40 --- get 0xffffffff8a5c07c2 -I- Found chip : at91sama5d3x (Chip ID : 0xffffffff8a5c07c2) -I- Loading applet applet-lowlevelinit-sama5d3x.bin at address 0x308000 ^C
I am using the SAMA5D3x-MB eval board + the SAMA5D35-CM module.
Before I installed the actual Segger J-Link tools(https://www.segger.com/downloads/jlink). I was ask for a FW-Update of the J-Link. I done this. Think this seems to break the tools.