kernel has No master clock no CPU clock in emulated at91sam9

This forum is for users of Microchip MPUs and who are interested in using Linux OS.

Moderator: nferre

Jiahuan
Posts: 6
Joined: Mon Oct 24, 2016 12:09 pm

kernel has No master clock no CPU clock in emulated at91sam9

Mon Jan 09, 2017 5:26 pm

Hi All,

Happy new year!

I am running the emulated at91sam board with a Linux kernel, but the booting message says "Clocks: CPU 0 MHz, master 0 MHz, main 10.000 MHz".

When running the same kernel on the real at91sam9261 board, the booting message says "Clocks: CPU 200 MHz, master 100 MHz, main 10.000 MHz".

And I have the "Division by zero in kernel" error for the uart clock. It should be also caused by the clock problem.

The "MCK" master clock is generated by Power Menagement Controller and used by the other peripherals through a global parameter. However, whatever value I set to "MCK", there is no impact on the clock of the kernel. I cannot solve the problem through the emulation codes. What is the part I should focus on to get clock working?

The whole booting message is in the following.

Best regards,

Jiahuan


===============================================================================

$ ~/test/qemu/build/arm-softmmu/qemu-system-arm -initrd initramfs_new -M at91sam9261 -kernel zImage_at91sam9261-nographic -serial stdio -serial stdio -serial stdio -serial stdio -append "console=ttyS0"

QEMU 2.7.50 monitor - type 'help' for more information

(qemu) Uncompressing Linux... done, booting the kernel.

Linux version 3.0.85 (jiahuan@jiahuan-VirtualBox) (gcc version 4.9.3 20141031 (prerelease) (Linaro GCC 2014.11) ) #3 Tue Nov 22 15:50:56 CET 2016

CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177

CPU: VIVT data cache, VIVT instruction cache

Machine: Atmel AT91SAM9261-EK

Memory policy: ECC disabled, Data cache writeback

Clocks: CPU 0 MHz, master 0 MHz, main 18.432 MHz

Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512

Kernel command line: console=ttyS0

PID hash table entries: 512 (order: -1, 2048 bytes)

Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)

Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)

Memory: 128MB = 128MB total

Memory: 125668k/125668k available, 5404k reserved, 0K highmem

Virtual kernel memory layout:

vector : 0xffff0000 - 0xffff1000 ( 4 kB)

fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)

DMA : 0xffc00000 - 0xffe00000 ( 2 MB)

vmalloc : 0xc8800000 - 0xfee00000 ( 870 MB)

lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)

modules : 0xbf000000 - 0xc0000000 ( 16 MB)

.init : 0xc0008000 - 0xc0028000 ( 128 kB)

.text : 0xc0028000 - 0xc03e88c8 (3843 kB)

.data : 0xc03ea000 - 0xc040e9c0 ( 147 kB)

.bss : 0xc040e9e4 - 0xc04221ac ( 78 kB)

NR_IRQS:192

AT91: 96 gpio irqs in 3 banks

Console: colour dummy device 80x30

------------[ cut here ]------------

WARNING: at drivers/tty/serial/serial_core.c:401 uart_get_baud_rate+0xe8/0x158()

Modules linked in:

[<c0031bb4>] (unwind_backtrace+0x0/0xec) from [<c003cbe4>] (warn_slowpath_common+0x4c/0x64)

[<c003cbe4>] (warn_slowpath_common+0x4c/0x64) from [<c003cc98>] (warn_slowpath_null+0x1c/0x24)

[<c003cc98>] (warn_slowpath_null+0x1c/0x24) from [<c018a830>] (uart_get_baud_rate+0xe8/0x158)

[<c018a830>] (uart_get_baud_rate+0xe8/0x158) from [<c018d548>] (atmel_set_termios+0x2c/0x200)

[<c018d548>] (atmel_set_termios+0x2c/0x200) from [<c018a9ec>] (uart_set_options+0xd4/0x118)

[<c018a9ec>] (uart_set_options+0xd4/0x118) from [<c0016b10>] (atmel_console_setup+0x130/0x140)

[<c0016b10>] (atmel_console_setup+0x130/0x140) from [<c003db04>] (register_console+0x21c/0x344)

[<c003db04>] (register_console+0x21c/0x344) from [<c00169c8>] (atmel_console_init+0x44/0x5c)

[<c00169c8>] (atmel_console_init+0x44/0x5c) from [<c0015cbc>] (console_init+0x20/0x30)

[<c0015cbc>] (console_init+0x20/0x30) from [<c0008824>] (start_kernel+0x1b8/0x270)

[<c0008824>] (start_kernel+0x1b8/0x270) from [<00008040>] (0x8040)

---[ end trace 1b75b31a2719ed1c ]---

Division by zero in kernel.

[<c0031bb4>] (unwind_backtrace+0x0/0xec) from [<c014b294>] (Ldiv0+0x8/0x10)

[<c014b294>] (Ldiv0+0x8/0x10) from [<c018a134>] (uart_get_divisor+0x20/0x44)

[<c018a134>] (uart_get_divisor+0x20/0x44) from [<c018d558>] (atmel_set_termios+0x3c/0x200)

[<c018d558>] (atmel_set_termios+0x3c/0x200) from [<c018a9ec>] (uart_set_options+0xd4/0x118)

[<c018a9ec>] (uart_set_options+0xd4/0x118) from [<c0016b10>] (atmel_console_setup+0x130/0x140)

[<c0016b10>] (atmel_console_setup+0x130/0x140) from [<c003db04>] (register_console+0x21c/0x344)

[<c003db04>] (register_console+0x21c/0x344) from [<c00169c8>] (atmel_console_init+0x44/0x5c)

[<c00169c8>] (atmel_console_init+0x44/0x5c) from [<c0015cbc>] (console_init+0x20/0x30)

[<c0015cbc>] (console_init+0x20/0x30) from [<c0008824>] (start_kernel+0x1b8/0x270)

[<c0008824>] (start_kernel+0x1b8/0x270) from [<00008040>] (0x8040)

Division by zero in kernel.

[<c0031bb4>] (unwind_backtrace+0x0/0xec) from [<c014b294>] (Ldiv0+0x8/0x10)

[<c014b294>] (Ldiv0+0x8/0x10) from [<c018a108>] (uart_update_timeout+0x5c/0x68)

[<c018a108>] (uart_update_timeout+0x5c/0x68) from [<c018d664>] (atmel_set_termios+0x148/0x200)

[<c018d664>] (atmel_set_termios+0x148/0x200) from [<c018a9ec>] (uart_set_options+0xd4/0x118)

[<c018a9ec>] (uart_set_options+0xd4/0x118) from [<c0016b10>] (atmel_console_setup+0x130/0x140)

[<c0016b10>] (atmel_console_setup+0x130/0x140) from [<c003db04>] (register_console+0x21c/0x344)

[<c003db04>] (register_console+0x21c/0x344) from [<c00169c8>] (atmel_console_init+0x44/0x5c)

[<c00169c8>] (atmel_console_init+0x44/0x5c) from [<c0015cbc>] (console_init+0x20/0x30)

[<c0015cbc>] (console_init+0x20/0x30) from [<c0008824>] (start_kernel+0x1b8/0x270)

[<c0008824>] (start_kernel+0x1b8/0x270) from [<00008040>] (0x8040)

console [ttyS0] enabled

Calibrating delay loop...
blue_z
Location: USA
Posts: 1550
Joined: Thu Apr 19, 2007 10:15 pm

Re: kernel has No master clock no CPU clock in emulated at91

Tue Jan 10, 2017 12:43 am

Study at91_pmc_init() and at91_css_to_clk() in arch/arm/mach-at91/clock.c

Return to “Linux”

Who is online

Users browsing this forum: No registered users and 1 guest